‘Buckingham Minor’and ‘Highgrove’ Radiator Valves

( ‘Buckingham Minor’ is a registered trade mark of Brass Products Ltd. )

5 year Guarantee

Any valve found to be defective in operation within 5 years of installation can be returned for prompt repair or exchange.
This warranty does not cover any damage caused during or after installation by the use of unnecessary or inappropriate forces.

Fitting Instructions

Unwrap valves, preventing damage by laying them on the tissue paper in which they were wrapped.
Apply sealing tape or sealant to the thread of the radiator connector. Tighten the connector into the radiator using a 12mm. hexagon key.Ensure that the rubber ‘o’ ring is in place on the connector before re-attaching the valve body. After installation clean the valves with a soft cloth.

To prevent damage to the valve nuts, cut strips of cardboard from the packaging and wrap around the nuts before applying a spanner to them.

Specifications

Thermostatic valves are bi-directional.  Operating temperature range approximately 5-30 degrees centigrade.  Turn handwheel clockwise to decrease the temperature and vice versa. Normal room temperatures are achieved with between 1 or 2 black rings being exposed on the valve stem.  Complete clockwise rotation of the handwheel will give full mechanical shutdown of the valve, overriding the thermostatic mechanism. Heating systems with thermostatic radiator valves must be fitted with relevant differential by-pass valves.
Test Pressure: 7 bar/100 psi - manual and thermostatic.  Differential pressure: 0.6 bar - thermostatic only.

*Pipe centre distances

The centre line of the inlet pipe of a Buckingham Minor or Highgrove valve fitted with a 1/2” BSP/NPT radiator connector is 47mm. +/- 2mm. from the face of the radiator inlet bush.


*IMPORTANT – these centre distances should be used as a guide only. Radiator bushes not to British Standards and the use of thread sealing tape can alter these distances dramatically.

Valve weights

A pair of Buckingham Minor or Highgrove valves weigh on average 1.1 Kg per pair depending on the valve type.