Valve Specifications - guaranteed BRITISH MADE

For enquiries please telephone 01233 731112


Brass Products Ltd., The Gaer, Ashford Road, Hamstreet,
Ashford, Kent TN26 2EA

All valves and accessories are accurately engineered from solid brass and then individually assembled and polished by hand.

We are able to offer advice on the installation of our products and answer any technical questions you may have regarding them.

5 YEAR WARRANTY ON ALL VALVES

Any valve found to be defective in its operation within 5 years of installation can be returned to Brass Products Ltd. where it will be promptly repaired or exchanged.

This warranty does not cover any damage which may be caused during or after installation by the use of unnecessary or inappropriate forces.

1/2" Valves have an average maximum overall height of 120mm and an approximate weight of 1.1kg per pair.

Supplied with a 1/2" BSP tapered thread radiator connector and with a 15mm. compression inlet connection.
The radiator connector is fitted with 12mm. hexagon key ( not supplied ).

3/4" Valves have an average maximum overall height of 160mm and an approximate weight of 2.5kg per pair.

Supplied with either a 3/4" or 1/2" BSP tapered thread radiator connector and this is fitted with a special key supplied in each box.

Valves have a 22mm. compression inlet connection as standard,which can be fitted with a reducing bush for use with 15mm. pipe if required. 3/4" valves can also be supplied with either 1/2" or 3/4" female, parallel threaded inlet connection for the installation of traditional iron pipe.

LATEST NEWS

All Thermostatic Valves now have our unique internal mechanism which, when the handwheel is turned fully clockwise, safely overrides the thermostat to give full manual closure. This can be very useful during installation or maintenance.

All Thermostatic Valves

have a reverse flow capability and an approximate range of between 5 and 30 degrees centigrade ( dependent on installation conditions ).